SW-218EB

Liên hệ
  • Cấu tạo : Low 2x18” LF driver
  • Tần số đáp ứng (+/- 3 dB): 28 Hz – 100 kHz 
  • Công suất AES: 3400W
  • Trở kháng: 4 ohm
  • Độ nhạy: 103 dB
  • Mức áp lực âm thanh đỉnh : 143 dB
  • Thương hiệu : Tây Ban Nha
  • Xuất xứ : Tây Ban Nha
  • Bảo hành : 2 năm

The SW-218EB is a high performance loudspeaker defined by its exceptional headroom and an Extended frequency response.

The SW218EB housing two linear, high-excursion 18-inch cone drivers mounted in a vented cabinet and optimally tuned port with flared ends to reduce turbulence and noise under high drive conditions.

The loudspeaker’s 28Hz to 100Hz operating frequency range allow it to integrate with any Tecnare Loudspeaker System. When the SW218EB operate in infrasub mode others Tecnare subwoofers can be used to extend up the frequency response.

The optional rigging kit (factory-installed option) allow the loudspeaker to be flown. Rigging system allow accomodate reversed units for flown cardioid array.

To guarantee optimum performance, the SW218EB should be used in combination with T20-44 amplifier. The T20-44 provide power as well as advanced crossover function and the limiting ensures maximum driver protection, minimizing power compression while yielding high constant output under high continuous and peak power conditions. A different preset library is offer from the most of application even standard or cardioid configuration. Three low-pass filter are available.

This exceptional features, coupled with big headroom and optimized rigging options, makes the SW-218EB a flexible tool for low-end directional applications for large-scale tours and installations.
The subwoofer cabinet is constructed of first grade birch plywood and has an high-quality Polyurea paint finish. The front of the subwoofer is protected by a hex-stanmped, steel grille backed by an acoustically transparent foam.

Two ground runners to protect the botton allow stacking the subwoofer in horizontal and vertical position. The subwoofer shall be connected via one 4-point speakON

Features

  • High temperature 4.5-inch voice coil drivers
  • 2 x 18-inch-LF cone driver
  • High-output and high-definition sound

Applications

  • Stadium
  • Club sound reinforcement
  • Sound system rental
  • Arenas
   
Frequency Response: 28 Hz – 100 Hz ±3dB, measured on axys
Components: Low 2x18” LF driver
Nominal Dispersion: Standard or Cardioid
Impedance:  4 Ohm
Axial Sensitivity:  103 dB (1w/1m)
Calculated SPL:  137 dB continuous /143 dB peak (T-20 Amplifier)
Power Handling:  3400 W AES / 6800 W continuos
Dimmensions (HxWxD) (millimeters/inches): 546x1340x700 mm
  22.10" x 52.75" x 27.56"
Net Weight (kg/Pounds):  90 kg
  198,41 lbs
Construction:  18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. Two recessed carrying handle.
Grille: Powder coated perforated steel.
Nội dung tùy chỉnh
Nội dung tùy chỉnh
popup

Số lượng:

Tổng tiền: